Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In with Twitter

need help (patch) Ohm64 maxMsp leds.

hello. i need a hand for max/msp patch.. i tried to look information how to setup, downloaded examples but sad that i'm newbie in max so don't understand them.. ;(

could anyone make a patch and share it with me like:

1. set number (how many leds you want to light for example 5 or 9 and so on.
( if i press new one oldest one goes off)

2. set interval between notes or cc for example (0-27)

thanks in advance!

Comments

  • Here is a first example that demonstrates how to toggle on / off leds of the ohm first column.
    Copy and paste this text and use the "new from clipboard" max option

    max v2;
    #N vpatcher 15 55 990 830;
    #P window setfont "Sans Serif" 9.;
    #P window linecount 2;
    #P comment 284 549 333 9109513 send to the ohm for visual feedbakc first inlet = notes number id / second outlet = velocity;
    #P comment 526 469 333 9109513 the toggle object send 1 or 0 message \, so when its on i send 1*64 to the velocity parameter;
    #P window linecount 1;
    #P comment 511 411 333 9109513 toggle notes on/off;
    #P comment 332 299 333 9109513 sel routes incoming midi messages \, 0 1 2 3 4 5 6 7 are the led numbers;
    #P comment 258 259 333 9109513 stripnote filters note on and off. its neccessary to kill the "release" function;
    #P newex 493 464 27 9109513 * 64;
    #P toggle 492 411 15 0;
    #P newex 465 464 27 9109513 * 64;
    #P toggle 464 411 15 0;
    #P newex 436 465 27 9109513 * 64;
    #P toggle 435 412 15 0;
    #P newex 408 465 27 9109513 * 64;
    #P toggle 407 412 15 0;
    #P newex 380 464 27 9109513 * 64;
    #P toggle 379 411 15 0;
    #P newex 352 464 27 9109513 * 64;
    #P toggle 351 411 15 0;
    #P newex 323 465 27 9109513 * 64;
    #P toggle 322 412 15 0;
    #P newex 295 465 27 9109513 * 64;
    #P toggle 294 412 15 0;
    #P newex 209 297 118 9109513 sel 0 1 2 3 4 5 6 7;
    #P newex 183 547 95 9109513 noteout;
    #P newex 183 176 40 9109513 notein;
    #P comment 227 178 203 9109513 notein receives midi messages from the ohm;
    #P newex 209 258 44 9109513 stripnote;
    #P connect 2 0 3 0;
    #P connect 2 0 0 0;
    #P connect 0 0 4 0;
    #P connect 20 0 3 1;
    #P connect 18 0 3 1;
    #P connect 16 0 3 1;
    #P connect 14 0 3 1;
    #P connect 12 0 3 1;
    #P connect 10 0 3 1;
    #P connect 8 0 3 1;
    #P connect 6 0 3 1;
    #P connect 2 1 0 1;
    #P connect 4 0 5 0;
    #P connect 5 0 6 0;
    #P connect 4 1 7 0;
    #P connect 7 0 8 0;
    #P connect 4 2 9 0;
    #P connect 9 0 10 0;
    #P connect 4 3 11 0;
    #P connect 11 0 12 0;
    #P connect 4 4 13 0;
    #P connect 13 0 14 0;
    #P connect 4 5 15 0;
    #P connect 15 0 16 0;
    #P connect 4 6 17 0;
    #P connect 17 0 18 0;
    #P connect 4 7 19 0;
    #P connect 19 0 20 0;
    #P pop;
  • thank You! i will try to study this example!
    just question.. should work only 0-7 buttons? cause i can toggle on and of all grid.
  • I would say "you can do anything you want" even play PONG with your ohm.

    If you want to use all buttons for the grid you just have to add them to the patch following the same method as the patches show. 0 1 2 3 4 5 6 7 X X X X X X X X X X etc etc ....

    If you have a specific need , i could try to make it for you. But as english is not my native language you' gotta be very clear ;)
  • well, i see that! toggle works only on sel numbers pressed, but on ohm grid i can light also other leds for example 16 17 18 19 and so on. is it possible to limit noteout too? like ignore all other buttons but not 1st column? and could you give an email? would be better to communicate :) and thanks for the help!
Sign In or Register to comment.