It looks like you're new here. If you want to get involved, click one of these buttons!
Hey Mike, I'll check it out tonight. Are you using the unreleased b996 version or the version in the Livid installer?
No I used the unreleased b996 version the livid installer scripts are working fine for me even in 9.1.4
Evrtythign was working fine, just until I changed the fader and knobs banking to True and then it didn't work anymore, if I set it to False it works again.
Thanks for the details. I'll be working on that script tonight anyway, so I'll try to clear up the problem. Your feedback is VERY MUCH appreciated! :)
Don't worry I always like things to be perfect and I know you guys from Monomodular (you), Isotonik (Darren), Gridlock (Lee) and nativeKontrol (Stray) are doing a great job with your hard work. I am working on a template to get all your devices to work together in one live set, so I can build the ultimate performance template, so it would be great if all the devices are working perfect. I done the same for Darren with the Oktopad and I think I am well known to push everything to the very limit and see how far it can go hahahaha.
By the way is there an easy and simple way to swap the left and right knobs in the main page? For me it makes more sense if the EQ3 buttons where on the left side and the sends on the right. I know your busy but when you have some time just let me know. Take care and have a good evening
I'm going to rewrite a bunch of stuff in the CNTRLR script tonight, which will make everything a little easier to edit and move things in line with Live 9's new "standard operating procedures"....remind me after you see the next major push to git for CNTRLR and I'll let you know how to do it.....I'm not sure at the moment, since I haven't made the changes yet ;)
No problem take your time, I know you have a lot to do. I will get back to you at a later stage about this, because it is not the most important thing for me at the moment.
Re: voting, they won't let us Americans play :(
Ah yes sorry I forgot hahahaha
I just also realized that all of the steppr mods are working fine accept for accent, it fails to detect the drum rack in a lot of cases, sometimes it does detect it but sometimes not, might be a small thing to look at as well.
Another thing is that in accent the time1 and time2 are not working correctly, they are only switching as follows:
Accent proto has the same time1 and time2 issue, but does detect the instrument. I will leave this out of the set for the moment and check all the other stuff.
Re: time switching. That's how it's supposed to work. You can tweak the settings a bit in the "settings" page.
Thanks for the info, I thought the time switching was a bug, since there where a few more options so I thought the time1 was going 1 instance down and the time 2 was going one instances up, so that is me being confused hahaha. What I did notice is that the less are not moving in a constant time, more like they try to catch up with the speed and are not in sync. I will check the rest out in a few minutes, but it is pretty late here and got some stuff to finish tomorrow morning, but after that I got an entire weekend to look at stuff and do some testing as well as producing something new, because it is time to make some new fresh track.
Ok got the settings set to decrease and increase now, because it works easier for me to test the stuff and get more used to it. Will check some other stuff out tomorrow.
The new CNTRLR script is insane Amounra, great work. However I don't seem to be able to use the right and left knobs and faders for additional mapping? Is that normal, even when I set the fader and knobs options to True??
I've also realized that I loaded a drumsteppr with a native Core 909 kit from Ableton. The dials on the drumsteppr show the names of the parameters when selecting a voice, but they don't seem to respond to the cntrlr. When I move them with the mouse they do move, seems that they have no connection to the cntrlr. Everything else is working, I can put in steps, select voices, but just not tweak the parameters.
By the way could you also let me know how to change the Livid_CNTRL script to be mapped as follows:
Confirmed about encoders: I've fixed that issue in a recent push.....thanks for that.
Take your time Amounra, If the CNTRLR for monomodular is working as it should, then that will be the script I would use mostly.
Okie dokie, just pushed a new version. FADER/DIAL banking should be working now.
Hi there!The code's gone?! I made some related (working) script-mods of my own some time ago,but there was no time yet to compare your stuff ;) Any chance to take part in mailing?Cheerio,dp
Sure, private message me.....what code, by the way?
Hi Amounra, I think he means that he cannot see the piece of the script, because it is on page 1. At least I think that is what he means with code.