Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In with Twitter

Is a .1uF cap to ground on each analog line ok instead of .01uF

edited May 2014 in Hardware


I have over 100 analog lines on two Brain2's.  I happen to have enough .1uF caps to do the bypassing to ground on these lines.  Will it cause any problems if I use this value?


  • The .1uF's should work for you. I'd suggest trying a few before installing 100 of them. Sounds like you have a big project going on. We'd love to see pictures when its done.

Sign In or Register to comment.